Note Devices need to be restarted after configuring the special Group Policy or adding the registry key. Before restarting Windows 10, version , Windows 10, version and Windows Server , you will need to also run following command from elevated PowerShell prompt:.
After installing KB or a later update, certain printers in some environments using Point and Print might receive a prompt saying, "Do you trust this printer" and requiring administrator credentials to install every time an app attempts to print to a print server or a print client connects to a print server.
This is caused by a print driver on the print client and the print server using the same filename, but the server has a newer version of the file. When the print client connects to the print server, it finds a newer driver file and is prompted to update the drivers on the print client, but the file in the package it is offered for installation does not include the later file version. Workaround: Verify that you are using the latest drivers for all your printing devices and where possible, use the same version of the print driver on the print client and print server.
Resolution: This issue is resolved externally by adjusting the print drivers in your environment. If updating drivers in your environment does not resolve the issue, please contact support for your printer manufacturer OEM.
After installing updates released July 13, on domain controllers DCs in your environment, printers, scanners, and multifunction devices which are not compliant with section 3. Next steps: A temporary mitigation is now available.
For more information, please see KB - Smart-card authentication might cause print and scan failures. After installing KB or later updates including out of band updates, KB and KB , you might have issues printing to certain printers.
Various brands and models are affected, primarily receipt or label printers that connect via USB. Resolution: This issue was resolved in KB , released July 13, For enterprise-managed devices that have installed an affected update and encountered this issue, it can be resolved by installing and configuring a special Group Policy. Resolution: This issue was resolved in the out-of-band update KB It is a cumulative update, so you do not need to apply any previous update before installing it.
KB is now available on the Microsoft Update Catalog and must be manually downloaded and installed. See the Microsoft Update Catalog for instructions. After installing KB or later updates, the news and interests button in the Windows taskbar might have blurry text on certain display configurations. After installing KB or later updates, apps accessing event logs on remote devices might be unable to connect. This issue might occur if the local or remote has not yet installed updates released June 8, or later.
You might receive an error when attempting to connect, for example:. Note Event Viewer and other apps using current non-legacy APIs to access event logs should not be affected. This issue is resolved if the local and remote devices both have KB installed. After installing KB or later updates, 5.
Note This issue does not occur when stereo is used. When using the Microsoft Japanese Input Method Editor IME to enter Kanji characters in an app that automatically allow the input of Furigana characters, you might not get the correct Furigana characters and might need to enter them manually. In this article. Connections to printers shared via print server might encounter errors This issue is observed when print clients try to connect to a remote printer shared on a print server.
OS Build Resolved KB Microsoft Installer might have issues updating or repairing apps Affected apps might fail to open after an update or repair has been attempted. Smartcard authentication might fail when attempting to connect using Remote Desktop Devices attempting to make Remote Desktop connections to devices in untrusted domains might be unable to connect. Receiving a prompt for administrative credentials every time you attempt to print This issue affects devices in environments in which the print server and print client are in different times zones.
Custom printing properties might not be correctly provided to print server clients This issue will not cause printing operations to fail, but clients might print with default settings only.
Installation of printers might fail when attempted over some network connections This issue has been observed in devices which access printers via a print server using HTTP connections.
Administrator credentials required every time apps attempt to print Certain printers in some environments using Point and Print might prompt for credentials every time when printing. Printing and scanning might fail when these devices use smart-card authentication Non-compliant printers, scanners, and multifunction devices might fail to print when using smart-card authentication.
Certain printers unable to print Most affected printers are receipt or label printers that connect via USB. A high-pitched noise might be heard when using 5. News and interests button on the Windows taskbar might have blurry text Certain display configurations might cause blurry text on the news and interests button in the Windows taskbar. Apps might have issues accessing event logs on remote devices Event logs might not be accessible from remote devices unless both devices have updates released June 8, or later.
Microsoft Installer might have issues updating or repairing apps. Originating update. UI elements and drawing within some apps may not work as expected. Connections to printers shared via print server might encounter errors. Workaround : You can take steps to workaround this issue on print servers that meet the following prerequisite: Print clients must have installed a Windows update released on or after January before the print server has installed KB Ensure that network security and VPN solutions allow print clients to establish RPC over TCP connections to print server over the following port range: Default start port: Default end port: Port Range: ports Please refer to these articles for further guidance: How to configure RPC to use certain ports and how to help secure those ports by using IPsec.
Smartcard authentication might fail when attempting to connect using Remote Desktop. Receiving a prompt for administrative credentials every time you attempt to print. Custom printing properties might not be correctly provided to print server clients. Installation of printers might fail when attempted over some network connections. Apps might fail to open, close unexpectedly or become unresponsive.
Registry Key: 1, Open a Command Prompt window cmd. Administrator credentials required every time apps attempt to print. Printing and scanning might fail when these devices use smart-card authentication. Certain printers unable to print. News and interests button on the Windows taskbar might have blurry text. Apps might have issues accessing event logs on remote devices.
You might receive an error when attempting to connect, for example: error 5: access is denied error The requested operation is not supported. GetEventLogCommand Windows has not provided an error code. Workaround: To mitigate this issue, you can try one or more of the following: Streaming the video or audio in a web browser or different app, instead of the app affected by this issue.
Enable Spatial sound settings by right clicking or long pressing on the volume icon in the notification area , selecting Spatial sound Off and selecting any of the available options. Workaround: To mitigate this issue on most devices, you can restart your device a second time. Most devices will sign into affected apps as expected for all subsequent restarts after the first restart that completes installation of the update.
If restarting does not mitigate the issue on your device, you can use the web versions of the apps:. Resolution: This issue is now resolved on the service-side and updates should be available.
Note: If you initiate a synchronization cycle and are still not being offered the updates, please check again soon. There might be slight delay as it propagates to all servers in all regions. After installing updates released March 9, or March 15, , you might get unexpected results when printing from some apps.
Issues might include:. Resolution: This issue was resolved in the out-of-band update KB It is a cumulative update, so you do not need to apply any previous update before installing it. You will need to Check for updates to install KB and might need to also select Download and Install. For instructions on how to Check for updates , please see Update Windows See the Microsoft Update Catalog for instructions.
This issue affects a subset of Type 3 printer drivers and does not affect printer drivers that are Type 4. If you are unsure which type your printer driver is, use the following steps:. Workaround: To mitigate the issue, follow the instructions in this video.
The Command Prompt commands from the video are as follows you will need to replace KX driver for Universal printing with the name of your printer, as explained in the video :.
You might receive stop error 0x7E in nwifi. You are more likely to encounter this issue when reconnecting to a Wi-Fi network after disconnecting, or when waking from sleep or hibernation. If you have automatic updates enabled, you will receive this update automatically and do not need to take any further action.
Microsoft and Discord have found incompatibility issues with some games using Direct3D 12 when the in-game overlay feature of Discord is enabled. When attempting to open affected games you might receive an error, or the game might close silently. Workaround: To mitigate this issue, you can turn off the in-game overlay in settings within the Discord app. Resolution: This issue is now resolved in an update to the Discord app. To verify you're on the latest version, right click on the Discord icon in the notification area and select "Check for updates If there are updates to install, it should install automatically but you might need to select the arrow icon in the upper right corner of the app to install the updated version.
There is no update for Windows needed to resolve this issue. You might encounter issues trying to install or after installing KB This update should only be offered if it is applicable to your device. You might need to update UEFI firmware of your devices or adjust other settings before deploying this update. For more information, see KB If you have installed this update and are experiencing this issue, the following steps should allow you to reset your device:.
Is this page helpful? Yes No. Any additional feedback? Skip Submit. News and interests button on the Windows taskbar might have blurry text Certain display configurations might cause blurry text on the news and interests button in the Windows taskbar.
OS Build Resolved KB Microsoft apps might be unable to sign in Authentication issues might be encountered for apps such as Microsoft Teams, OneDrive for Business and Outlook. Apps might have issues accessing event logs on remote devices Event logs might not be accessible from remote devices unless both devices have updates released June 8, or later.
Stop error 0x7E in nwifi. Some games might fail to open, or you might receive an error You might have issues with some Direct3D games when using in-game overlay feature of Discord. You might encounter issues with KB You might encounter issues trying to install or after installing KB News and interests button on the Windows taskbar might have blurry text.
Originating update. Back to top. Apps might have issues accessing event logs on remote devices.
